Tutorial: How to flash new firmware and debrand your Samsung i8910 Omnia HD

Briggs · #1 (**permalink**) 06-27-2009, 12:02 AM

Finally finished my tutorial on how to debrand / flash your Samsung i8910 HD.

Its located on our main site: http://samsungi8910omnia.com/how-to-...rand-tutorial/

Highspeed123 · #2 (**permalink**) 06-27-2009, 12:21 AM

Quote:

Originally Posted by Briggs

Finally finished my tutorial on how to debrand / flash your Samsung i8910 HD.

Its located on our main site: http://samsungi8910omnia.com/how-to-...rand-tutorial/

Good job on that! The warranty part is only true if you can't flash your firmware back to the one the phone came with. As long as the device is still capable of receiving the firmware you can just flash it back before return and they will be none the wiser. I have done this myself. :P

2mnyshp · #3 (**permalink**) 06-27-2009, 02:25 AM

applaud for that one! its good to see that they are still honest peeps out there...

Briggs · #4 (**permalink**) 06-27-2009, 03:37 AM

Quote:

Originally Posted by 2mnyshp

applaud for that one! its good to see that they are still honest peeps out there...

Thanks, And its free I'm not trying to sell you this for 5 pounds lol! Like some twats.
That stuff is free and should remain that way.....

Laura Croft · #5 (**permalink**) 06-27-2009, 03:53 PM

Am sure most of you know this but remember to backup your contacts first. I didn't (and should have known better) and lost the lot.

Shaco Unica · #6 (**permalink**) 06-27-2009, 07:20 PM

Followed the tutorial (was a bit nervous) but all went very well.

Thanks

reyes84 · #7 (**permalink**) 06-27-2009, 08:59 PM

Greattttttt stuffffffffffffffffffffffff ;D

bigfish808 · #8 (**permalink**) 06-27-2009, 10:26 PM

Trying to follow the turorial on the homepage for flashing and debranding my I8910.
I'm trying to get my phone in boot mode by holding the volume up, menu and power button all at the same time but it just seems to start as normal and boots up the orange home screen?

Am I doing something wrong?

cinek · #9 (**permalink**) 06-27-2009, 10:28 PM

I think there's a mistake in the tutorial, what you need to hold is: the volume up key + screen lock key and power on the phone

bigfish808 · #10 (**permalink**) 06-27-2009, 10:38 PM

thanks,
flashed to latest polish firmware, where are language settings?!

I've went throught to the settings (cog) but can't find flag?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

The Following 12 Users Say Thank You to Briggs For This Useful Post:
dr.divx (03-20-2010), DSA (02-17-2010), hisham (08-24-2009), hrishikesh (12-09-2009), iRS (12-01-2009), kibe-br (09-15-2009), MarcusT (09-13-2009), publisher (10-02-2009), Roger99 (09-15-2009), scruffy doug (09-05-2009), sreekanthiyer (10-22-2009), zacharias (02-13-2010)